On this page, we have managed to share the official usb driver for Leagoo Elite 3 Device. If in case you were already searching for the usb driver for this device, then this page will help you out.
There are 3 usb driver available for your device. Two is for Flashing the Stock Firmware and last is for normal connecting the device to the computer.
- Leagoo Elite 3 CDC driver For Flashing Firmware
- Leagoo Elite 3 VCOM driver For Flashing Firmware
- Leagoo Elite 3 ADB driver For Normal Connecting
How to install driver manually:
Step 1: Download and extract the driver on your computer.
Step 2: Open Device Manager and Click on Add the Legacy Hardware Menu.
Step 3: Click Next.
Step 4: Select Install the hardware that I manually Select from a list.
Step 5: Locate the extracted driver manually on your computer.
Step 6: Click Add.
Step 7: Your Driver will be installed and listed in the Device Manager.
[*] If you are trying to flash stock firmware on your device then download CDC and VCOM Driver Only. ADB Driver will not work for flashing the stock firmware.
Keep in Mind:
[*] The above Leagoo USB Driver are officially provided by Leagoo Mobile Inc. If in case any of the above driver did not work for you then you can complain to Leagoo Mobile Inc Officially or complain us using the comment box below.
[*] For Windows Computer Only: With the help of above drivers you can easily connect your Leagoo Smartphones and Tablets to the Windows computer only.
[*] Leagoo Stock Firmware: If you are looking for the original Stock Firmware then head over to the Leagoo Stock Firmware Page.
[*] Request Driver: If you are looking for any specific driver that is not listed on this page then you can request it through the comment box below (do not request driver from the contact page or else it will be ignored).